As per today evening the status quo is unchanged: EG4 monitoring website can not read the inverter settings yet the Station seems to be online ...

Yet my system seems to be online:   @EG4 Eric - time to check Your IT support     Brgds   K

Well,   I have exact same issue as we speak. It seams the EG4 monitor website has issues  

@joey it may sound weird, but try multiple cold restarts with longer power down periods (of BMS) - in my case post BMS firmware update the system ...

@joey   I have been running my setup ( just like yours with grid and gen connected) in Lead acid mode for more than 6 months without issues (...

Try cold restart of entire system including battery BMS (power down all components for several minutes while in lead acid mode) then power up starting...

Check for errors thrown by 6000xp. Check for error logs on battery display Does the inverter 'see' the battery when in lithium mode? if not check...

@glendale789-eg4-forum @Ravasunpower Have you noticed any differences in the inverter behavior (fan noise) after firmware upgrade? Brgds  ...

@dtbaker61 I can't agree more with you. Whenever the system is marketed as Off-grid it should have to be manageable (upgrades, serviced and so on...

@dtbaker61 Well, As hobbyist BETA tester I always build backup plan. I do have externals bypass transfer switch separating Inverter from the hou...

@dtbaker61   I have 6000xp with Gen boost enabled and 110v/220v 32A split phase step up transformer connected to Gen ports. Basically it is ...

@dtbaker61 I have two 600VA UPS units - one powering the wi-fi and the other internet gateway. All firmware updates I have done were in off-gr...

@bporter When power cycling the system I just turned everything off starting from Grid supply, PV, inverter, EPS, opened all the breakers and shut...

@dtbaker61 Maybe new firmware will offer an alternative - look at the latest for 6000xp - new battery type 30 for lithium batteries in open loop ad...