Deleted all files and loaded only the RS485. bin file, same thing. Fault trips.

I have the same set up as you except I have just a single 6000xp. Can you share your experience with dual inverters? I'm very likely to pull the tri...

You would need to go to the working mode tab in the settings and set the Micro-Grid parameters

The MPPT requires more than 100V of PV input to begin operating and generating wattage. Whether 3.2kW is enough power to support your loads and charge...

@robstange Got it! If you need a replacement dongle or would like assistance getting it connected, feel free to let me know. I’d be happy to walk you ...

@krzysiek_kta Thank you for the feedback and yes, I can definitely share this with our team!

I apologize, ignore my last post. You only need 1 cable, which is the one that the adapter comes with. You can try removing one file, but you should b...

Are you using the correct cables for each update?

I've attached a few helpful links that explain this in more detail. It’s recommended to maintain an 80% Depth of Discharge (DoD), regularly dischargin...

@powerup Yes, that should work as well.

@eg4eric Thank you, I'll try and post my results. In my situation the batteries are 10" apart so the 42" conductor can reach the alternate battery f...