@jar349You need to make sure the window is full screen.

@joey Can you share some pictures of how everything is connected? Are you getting any warning or errors?For the inverter to communicate properly with ...

Check for errors thrown by 6000xp. Check for error logs on battery display Does the inverter 'see' the battery when in lithium mode? if not check...

Also, no combiner box, only 2 IMO DC disconnects. (4 pole - 2 strings)

My Signature Solar designer sent me this plan for my soon to be installed 44 panels into a 12000XP. I have not verified the max V or I in but he menti...

Please contact me before trying to do so

@eg4eric - 43730P0888

I have 2 wall mount batteries, 2 inverter chargers and 1 mini split...   I'm off grid, zero wifi. Unable to view or connect any device &nbs...

OUTSTANDING!!!! THANK YOU! Let me verify from the utility's team that this is good!

@eg4eric Hi, I attached a video of the transformer in my furnace (left side of the frame). You can hear when I enable SMART Load the hum is from that...

Doing more study on at what point the oscillation starts it at 56.5v. It then starts to over run that up to 57.1 or so maybe higher then down to 54v -...

I recently updated my firmware to 1212 and now the fan seems to be at high speed constantly. Also it would run relatively slow and when you put a loa...