Regarding its lights, all it does is blink the WiFi symbol — nothing else. Also, pressing and holding the bottom at bottom for 10+ seconds does no...

I can connect to the WiFi of the dongle, but 10.10.10.1 does not respond in a web browser. However, I can ping 10.10.10.1 just fine, so clearly I am...

@chris07x I neglected to enable "A". I assumed it to mean "only act as a backup". I think there is mode where the inverter passes power through fro...

Thanks. All my times are the same but the desktop application is where it ask for Daylight saving time input. My work around is setting the time zone ...

@darcymyers the server will take up to 5 minutes for the command to stick. However, is it still currently set to DST? The station is showing "NO" on m...

@eric Probably a dumb question, but since inverters invert DC to AC, how is this inverter converting AC to DC when it is powered from the grid or gene...

@george-redinger When you spoke about having to enable "Battery Backup mode" when the grid went down, are you talking about the settings on A or B of ...

@jared nevermind it only took 3 minutes and it already reset back to daylight savings YES.

@jared here you go, both are set and the same. in an hour when the daylight savings turns its self back to YES from NO i'll screenshot it again.

@eric There is enough production to power both the load and the batteries. I've noticed the Enphase app is always exporting about 10% (see image) of ...

@ron I'm sorry, could you provide more detail on what you're referring to?

@jared I will absolutely check that as soon as I have time to log in but I'm not sure it will be helpful as the problem is not the time the problem is...

Also, just to add. Apparently if I set "Grid Sell Back" to disable, the connection to my enphase combiner gets lost and I start to import from the gri...

Is your system producing enough solar to power loads and charge batteries?For the Battery Priority Start Time 1, try setting to 00:01. If this still d...