EG4 Community Forum

Anonymous
Joined: November 21, 2026 1:56 pm
Topics: 7 / Replies: 19
Reply
RE: I need help getting my EG4 System to work

Thank you for your comment, by the way! Appreciate it.

4 months ago
Reply
RE: I need help getting my EG4 System to work

I am not clear on what you mean by where the power is going. It is not going anywhere as far as I see. It is a lowering of how much power is coming fr...

4 months ago
Reply
RE: Why is AC charging occurring?

@eg4eric Obviously the battery voltage varies over the course of a day. Attached is the graph showing the battery voltage for that day. The cut-off ...

4 months ago
Reply
RE: EG4 6000XP Operating Temperature Range

Do you think I could get a reply to this soon? Seems like a straightforward answer should be easily available.  

4 months ago
Forum
Reply
RE: after an eps overload one side of my 12000xp pv not working

found out its a loose wire or bum MC4, all is fine

4 months ago
Forum
Topic
Reply
RE: Help! - Had solar panels, EG4 Inverter and Batteries installed in 7/2026- Has never been right.

Thanks for your replies. After much effort and many hours of calls and adjustments by both my installer and EG4 support, it appears as though my probl...

4 months ago
Reply
RE: Basic min & max voltage logic

@jamcandles If you have our EG4 Indoor WallMount batteries, we recommend operating the batteries with an 80% DoD. This helps minimize SOC drift, mai...

4 months ago
Reply
RE: How to force 12kBTU solar mini splits to work at full capacity in cooling mode?

@krzysiek_kta You should be able to select it through this option

4 months ago
Reply
RE: Odd 12000xp behavior when coming off grid-charge to Solar/Battery mode.

You should not be experiencing any of these issues, especially after updating the battery firmware. I recommend contacting our Technical Support Tea...

4 months ago
Forum
Reply
RE: Why is AC charging occurring?

Do you know what the voltage was on the batteries?Also, what do you have the on-grid Discharge cut-off Percentage or Voltage set to?

4 months ago
Reply
RE: Feature Request: EG4 Monitor App LOCAL NETWORK Access

I’ve finally got all this working! I outdoor that the dongle had to be removed for me to get good data from the rj45 connection just above the Batt Co...

4 months ago
Forum
Page 28 / 437