@eg4eric News on fix for charging open loop by voltage ? I'd be happy to test. seems like developers should be able to spot the coding difference betw...

Yes

@swoods Thank you for this information! Everything should be resolved and no one should be having any issues. If anyone is having issues, please let m...

@powerup Thank you for bringing this to our attention. I’ve already reported it, and it should be resolved shortly.

It is Pylon only.

Does the battery have Luxpower protocol?

@dtbaker61 If you have WiFi at the sites, you could place wireless temperature sensors that you can monitor remotely. This isn't a product plug, but...

@eric Well, I believe updating to the latest firmware broke things which led us all here. This is what I updated to which broke the monitoring ......

@dtbaker61 I am glad you have something that works for your system and how you want to manage it. Most other controllers are very flexible to work wit...

Throughout the update, the inverter will automatically cycle power as it moves from one update to the next. It's best if you have the modem and router...

@bobcYou can update batteries and inverter to the latest firmware. no need to be done in sequence.

@ouijifour most mfg BMS don't start balancing until 56.0 or thereabouts as the current drops during the CV phase of charging. An end of charge voltage...

  This does not solve the issue. Both firmwares were updated to the latest and did not fix anything. I also tried to update the rs485 firmware ...

@dtbaker61 That is assuming someone wants to charge to 58v . I only charge to 55.2v which is 99% full. My balancing does not turn on until 55.2v so i...

That is correct. I just want to confirm for anyone that comes across this thread.when multiple inverters are connected in parallel, the generator must...