Firmware update Issue - SOLVED.   I have disconnected the system from the grid and PV array. Deep power cycled all components for over 30 m...

@ EG4 Eric - pls disregard my previous firmware downgrade request - let's see if the latest one holds   Brgds   K

Firmware problem solved - see my other post in firmware section. I have deep power cycled inverter, battery and BMS and switched back to Lithium typ...

What I was thinking initiating firmware upgrade on the Weekend!?!!?   I guess I had way too much trust in EG4 that it actually works as inten...

@! EG4 Eric   Can you downgrade my 600xp to previous firmware ASAP!

SO I made BIG mistake.   since I was to work with the Setup I decided to upgrade firmware. it showed successful and after 30min all shut down...

Reviving the thread.   After over 6 months flawless operations in Lithium type 1 mode the issue resurfaced this month. I had few nighttime ch...

Thanks Eric. I loaded the EG4 Connect app but could not find any notification settings. I went back into the original app (v. 1.6.7) to uncheck and ...

master as 0 and slave as 1 would make sense. However, mine does not display that.      

Hey Dirk,I have the same issue but I have a partial solution. If you make all of your desired settings, but leave the times as 00:00, you'll be able ...

I ended up reaching out to EG4 support, Provided them logs, screen shots etc. They have confirmed the small battery draw when sufficient solar is ava...

@carlrx7The monitoring website will display the Master battery as 0 and Battery #2 as Battery 01. This can be a little confusing, but it is normal beh...

Which inverters, batteries and generator do you have?