@eg4eric can you clear out my data please, I just completed my solar and grid sellback and would like to clear out all of the usage data from the past...

Got it. Thank you very much for taking the time to help me.

I am seeing it both on the EG4 Monitoring (43.4 C) site as well as my Solar Assistant instance and on multiple inverters. Here is an excel with data f...

The voltage settings should be configured based on the battery manufacturer's recommendations for your specific batteries. The only other setting to...

The fans will activate when the charging or discharging power exceeds 300W. Where are you seeing that the inverter is reaching 100°F?

@swigleyThank you for bringing this to our attention. It looks like it was just a typo in the file name, but I’ll report it so it can be corrected. If...

@eg4eric I went to download the latest Z02T04 today and although the Web page states that's the new 04 version, what downloads is the Z02T01 zip file ...

I do not have land to build a decent solar array. So, after thinking a bit. I came to the conclusion that a "free nights" plan and enough batteries ...

I am assuming that I should set setting #7 to 58.4v and #8 to 55.2v since I found this after posting my message. Is there anything else I should chan...

Thank you for sharing that!It appears to be a small bug. I'm not exactly sure what the other voltage represents. It seems like it could be each invert...

It should automatically detect it; however you can manually set it to 120/208 through the application settings on the Monitoring website, or you can u...

You can set the inverter to Lead acid, which will charge and discharge the battery by voltage. Do you know if the battery BMs has any protocols from t...

It depends on the distributor from whom you purchased your system. Each distributor has their own code. Who is your distributor?You can use EG4LUX01 f...