You can't do monthly, but if you go to Data > Data History, you can export data for 8 days at a time. The option is located on the top right of the...

The reason is because any time there is a setting configured with timing, it will take over according to the time. Although the batteries don't need t...

@old76ta Yes, the screenshots look like they were from a phone. which battery do you have for your system?

Can you share your inverter's serial number or station name with me so I can look into this and look at some data?

The height is 34.1", but I’m not sure exactly how far the legs can extend. I’ll look into it and let you know as soon as I have an answer.

Discharge Current limit is for both Lead acid and SOC. The inverter should already come preset with that setting. It should only be changed if you wan...

@potreroDo you have an external RSD initiator/button?

That simply means the system isn’t allowing you to set that parameter, possibly because the values are too low or too high, or it may be conflicting w...

We recommend wiring them as shown in the image below. While there may be other ways to connect them, this method ensures proper charging and dischargi...

What batteries do you have and how many?  

@fkitzmann After further investigation, I found out that we will be offering a Wi-Fi + Ethernet dongle. However, I have not yet received confirmation ...

@dtbaker61 You can increase the voltage setting so the inverter will begin charging the batteries. If you start the generator manually but the battery...

@sunnyside I don't have any additional information on that, but as soon as I do, I will let you know!

@potrero As of now, there haven’t been any changes. I’ll notify everyone through this forum as soon as there are.

@eagleridge Do you have the Share Battery setting enabled?