@simply-efficientDo you have you have your system set up already?When you turn the switch do your loads turn off?

@krzysiek_ktaI apologize! I did not see this post. I am getting with our HVAC Technician for this question.

@devynYou should be able to connect it directly to the outdoor unit if there is a breaker panel already. You just need to connect L1 and L2 into the o...

this morning, inverter says and current measurments verify, 112W but the EG4 says 203W and it's always about 115W higher than actual.   &...

bump. any ideas?   K

I have also had so many problems. I regret getting EG4. Most of my issues seem to have been resolved after months of frustration and frequent work wit...

FYI - This is the first install and has never worked.

Eric, So I was able to update the LCD screen from Version 22 to the current version of 25. Unfortunately it did not fix the issue of not receiving act...

Well S*it fire Batman! That Really SUX! 24k Mini-Split has a heart-attack! Of course I was out of town when it all went down. You can clearly see ...

Actually Eric, don’t change anything yet. Let me research non-parallel mode and I’ll let you know. But do let me know if that’s something I can tog...

Hmmm, the LCD’s weren’t showing the separate strings on that main overview screen when I looked after the SW update. I completely understand what you’...

@johngrI went ahead and put the system back in parallel view.I was able to confirm that, to view each string separately, the system would need to be t...